Heltec12V/24V Car Battery Disconnect Switch LED Voltage Display Remote Control Switch Low Voltage Protection for Battery Electric tool

HT-BDS01 Magnetic Latching Function This kill switch for car uses a new type of relay that controls circuit disconnection and cut-off by magnetic principle, with a standby current of 3mA, which is more energy-saving. Automatic Cut Off If the voltage is lower than 11.8V, the remote kill switch will automatically cut off the power supply after 120s to save electricity, if the voltage is higher than 13.2V, the remote control will be disabled to prevent accidental action to shut off the power while driving, and the power supply can only be controlled by the button on the switch. Easy Installation The power shut off switch uses a negative connection to ensure stable performance. Please remember to turn off the power before installation. Protect the Battery Using this car battery kill switch can avoid power consumption due to long-term parking, good point of electronic equipment, line aging, forgetting to turn off the light, etc. It can effectively protect and prolong the life of car battery. It can effectively protect and prolong the life of car battery. Specifications Battery disconnect switch rated current: 240A, rated voltage: 12V, standby power consumption: 3mA, power-off threshold: 11.8V±0.2V, instantaneous current: 500A. Operating Temperature: 30℃-90 ℃ Note: The remote control can be paired with the device normally within the working voltage range Manual button ON/OFF can be used to connect and diaconnect the device within the working voltage range When the battery voltage is below the threshold voltage (11.8V±0.2)for 60 seconds, an alarm prompt will be triggerd, and the battery will automatically disconnect for 120 seconds The battery voltage is higher than 13.3V, and the remote control is disabled to prevent accidental disconnection of the battery by pressing the remote control during driving Equioment enters false triggering protection state during driving and ignition HT-BDS01D Magnetic Latching Function The 12V/24V Car Battery Disconnect Switch is a smart, energy-efficient solution designed to protect and extend the lifespan of your vehicle’s battery. Equipped with advanced features such as LED voltage display, remote control functionality, and low-voltage protection, this switch is ideal for a variety of vehicles and operating conditions. LED Voltage Dispaly Real-time monitoring of battery voltage with a clear LED display, ensuring you stay informed about your battery’s health at a glance. Remote Control Switch Conveniently disconnect or reconnect your battery with a remote control, providing effortless operation from a distance. Low Voltage Protection When battery voltage lower tahn 11.8V,it will automatically cut off power;when the battery is higher than 13.2V  when you are driving,the remote control will be disabled to prevent accidental action. Manual Switch Easily control your car battery with a simple press of the manual switch. Quick, reliable, and convenient for everyday use. Specifications Battery disconnect switch rated current: 240A rated voltage: 12V standby power consumption: 3mA power-off threshold: 11.8V±0.2V instantaneous current: 500A Operating Temperature: -22℃-195