USB QC3.0 QC2.0 DC to DC Buck Converter Charging Module Fast Quick Charger

DescriptionThis module accepts a 6-24V Input and supports USB QC3 Charging on the output. It takes care of regulating the signals on the USB Data transer lines and offers fast charging when a compatible device is connected. Great for adding USB charging in your next project.Supports: QC2.0, QC3.0, MTK PE1.1/2.0, FOR Apple, FOR Samsung AFC,FOR Huawei FCP, FOR Spreadtrum SFCPInput voltage: DC 6~30VOutput voltage: default 5V, adjust range 3~12V according to fast charging protocolOutput capacity: single-port rated current 2.4A,Rated power 24WProtection measures: Output overvoltage protection, limit the output voltage does not exceed 13V (in the case of chip failure); input with a fuse.This mini DC-DC step-down voltage converter module supports 6-24V voltage input and 5V 3A output with input polarity reverse protection and output overvoltage protection, short circuit protection.It adopts synchronous rectification technology to ensure ultra-high power conversion up to 97.5% to take full use of your input power. On-board female type A USB port with identification circuit perfectly fit for smartphones as well as it can be useful to power or recharge any electronic gadget which required 5V input power up to 3AFeatures:Non-isolated buck module (BUCK) synchronous rectificationMaximum Output Current: 3A MAXConversion efficiency: can up to 97.5% (6.5V step down to 5V 0.7A) (after short reverse protection and fuses test value)Switch frequency: 500KHzOutput Ripple: 10mV around (12V to 5V3A) 20M bandwidthOutput indicator: The output voltage indicator is redOperating temperature: Industrial grade (-40 to 85 ) (the higher the ambient temperature, the lower the output power)Output overvoltage protection: Yes, input 1.5A fuse, output 5V have 300W TVS tube clamp protection.Flat copper inductor, improve conversion efficiencyWith output overvoltage protection. There is a 1.5A fuse, output 5V have 300W TVS tube protect your USB deviceHigh-quality USB portOutput voltage indicator (RED)Small size, Compact SizeInput with reverse polarity protection diode, will not damage when input connect incorrectlyUltra-low static current, 0.85 mA only. Do not need to add switch when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cableUltra-small size, 26.4 (L) * 15 (W) * 7.4 (H) mmInput voltage range: 6V-32VOutput voltage: default 5V, automatically adjust between 3-12V after triggering fast chargeOutput power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)Output voltage cable compensation functionConversion efficiency: 90%-97%Support multiple fast charging protocolsInput overvoltage and undervoltage protectionInput overcurrent protectionOutput overcurrent, short circuit protectionMachine over temperature protection Support fast charge agreementSupport DCP protocol, BC1.2, Apple, Samsung protocolSupport Huawei Fast Charge Protocol FCP/SCPSupport Huawei Fast Charge Protocol AFCSupport Spreadtrum Fast Charge Protocol SFCP · Support Qualcomm QC2.0 and 3.0Support MTK PE1.1/PE2.0Precautions:please enhance heat dissipation when fully used for load output(i.e. 5V@3A with 24V Input).For the ideal case (i.e. 5V@2A output with 12V Input) it does not need to enhance heat dissipation.Applications:Solar panel to mobile phone chargingCar charging retrofitDriving recorder power supplyHome power supply, smart plug modificationFast charge adapterPackage Includes:1 x USB Step Down DC-DC Converter Module