DALY BMS 16S 60V Lithium ion 40A Common Port Battery protection module.

Description DALY BMS 16S 60V 40A Lithium ion with Balance leads. DALY 16S Li-ion 40A Introduction about this BMS:  This is a 16S fixed configuration basically it cannot be used for any other battery pack configurations. Because it is only a Lithium ion battery management system only. As a result that they cannot be used for LiFePo4 and Li-Metal or LTO batteries.It is strictly for Li-Ion battery packs only. Over charge and over discharge protection: The Li-ion battery pack will stop charge after the cell voltage reaches 4.25V and stop discharge when its voltage reaches 3V. Temperature Protection: In high temperatures the bms ranges from 70℃ discharging battery protection. Meanwhile in low temperatures the bms ranges up to -20℃ battery protection. Short circuit protection: When there is a defect or damage to the circuit at same time the bms will shut down the whole Battery. Certifications Approved: ISO/ FCC/ RoHS/ PSE and CE APPROVED Applications: Solar and RV, Electric bikes and Skateboard including camping boats and Power tools, Lawn moving and household energy storage systems etc. What you will get: 16S Li-ion 40A rated voltage with 60V BMS Balanced wire sense cable (17 Wire sense cable with connector) Instruction Manual Conclusion: Most important that it is only a waterproof bms available in lithium industry. This BMS is also for all kinds of lithium-ion cells including 18650 ,21700,36500 cylindrical cells and prismatic cells. DESCRIPTION SPECIFICATION BATTERY TYPE Li-ion Continue discharge current 40A Peak current 120A±20A main circuit inner resistance ≤ 20mΩ Charge Voltage S*4.25V Charge Current 20A Over charge detect  voltage 4.25 ± 0.05V Over charge protection delay       1 Sec over charge release voltage 4.15 ± 0.05V Balance detect voltage 4.18V Balance release voltage 4.18V Balance current 30± 5mA Over discharge detect voltage 2.7 ± 0.1V Over discharge detect delay 1 Sec Over discharge release voltage 3.0 ± 1.0V Over current detect delay 1 mS Over current detect voltage OFF LOAD Short circuit protection condition Short circuit external load Short circuit detect delay 250µS Short circuit protection  relay condition Off load Temp protection Charge  <-5  ͦ C or >50  ͦ C discharge <70  ͦ C working current 100µA Sleeping current (when in discharge) 20µA  Working temp range -20   ̴ 70 ͦc Sleeping temp range  -40   ̴ 80 ͦc Weight 5.5 ounces Size 2.5*3.1*0.6inches Wiring Diagram Daly wiring diagram Standard & Smart 16S BMS wiring tutorial: https://dalybms.com/16s-bms-wiring-tutorial/     https://srikobatteries.com/product/daly-bms-16s-60v-lithium-ion-40a-common-port-battery-protection-module/